|
The correct choice of techniques of silicone tube
In the choice of silicon rubber hose, should be based on specific applications and select the appropriate silicone tube, silicone tube joint and assembly, considering such factors as: silicone tube, silicone tube size, type of silicone tube length, the system working pressure, the fluid system and the use of the environment, choose please refer to product standards.
Silicon rubber hose joint are varied, should be based on different types of silicon rubber hose to choose different joint. Note: two types of silica gel tube needs stripping external glue and without stripping external glue, then joint is not the same, need to peel the outer rubber type joint sleeve groove not too sharp, otherwise it will damage the enhancement layer of silicon rubber hose.
The right to withhold joints, silicon rubber hose assembly safe and normal work is critical. Many type of joint, to select the appropriate joint, sleeve design should be standard, reasonable, sharp groove, non-standard size will be deducted off the steel wire reinforced layer. Fittings withhold should according to the inner diameter and outer diameter of the silicone tube to determine the withholding amount.
This article from the Shenzhen City Qiyu Silicone Rubber Co., Ltd.: http://www.szhcty.com/news_v.asp? Id=264
In this paper, or feel like this to help you, please share it with your friends ^_^
|
Online Service 