|
How to use the waste emulsion pipe?
![]()
Latex tube either scrap surplus in production or after aging, can be used to make the items you want! Below small make up for example, making use of the waste emulsion pipe to make a mask.
First of all, the latex tube from Hevea Rubber Latex is prepared, the basic chemical composition of CIS polyisoprene. Is a kind of polymer, compounds with high elasticity.
Then, to the problem, how is the waste emulsion pipe dissolution? Through the chemical reaction or by physical reaction?
The chemical reaction is the first degradation then polycondensation finalized, the principle of this method is plausible, in fact, have a certain degree of difficulty. Need professional together equipment; physical reaction is directly dissolved by solvent, the general good solvents are ethanol and gasoline, gasoline is higher than the solubility of alcohol, Xiaobian selected gasoline as solvent. Specific methods are as follows:
1 use the scissors to cut broken waste latex tube;
2 with the boiling water boil and stir;
3 finally collapsed into the gas dissolved in solvent;
4 dissolved poured into a mould, prepared in advance of the;
5 wait for dry forming.
A good latex masks will succeed.
In short, small make up think using physical methods than chemical method is much simple, also can use waste latex tube do other small objects.
This article from the Shenzhen City Qiyu Silicone Rubber Co., Ltd.: http://www.szhcty.com/news_v.asp? Id=346
In this paper, or feel like this to help you, please share it with your friends ^_^
|
Online Service 