|
Silicone tube products in the packaging is easy when the mutual adhesion is what causes?
Silicone tube in the factory are immediately packed mailed to customers, some customers reflect the silicone tube easier each stick, are such as the position of open effort, and a clear traces along the edge of the contact surface of the. Which in the end is what causes it? Shenzhen, the following is a silicone rubber hose manufacturers for your analysis:
1 will not be vulcanized? Very simple to ensure that the product is fully vulcanized; adding 1~2 copies of the cool agent. Products are not fully vulcanized, this product will be sprayed with a surface active agent can be used to soak the product surface can be resolved, even if the product is not valid. Will contain fluorine surface active agent right amount of spraying parts surface on OK, the effect is good. You can use some of the material to solve the sticky. Some of the glue is really sticky, even if it is the same.
2 with the hydrogenated nitrile? Generally can be in the two paragraph before the injection mold release agent or anti rust oil, non two part of the product packaging can also be sprayed with anti rust oil or release agent. This is the solution, but the product may appear to be a little bit of oil, you can ask the customer whether to allow.
In short, silicone tube products in the packaging is easy to glue is not affect the performance of the product, if the color is good, you can apply to the manufacturers to explain the feeling of oil.
This paper is from Shenzhen,, id=453?
This love or feel this to help you, please share it with your friends ^_^
|
Online Service 