|
When the silica gel tube is used to adjust the sulfur, sulfur can be used to adjust the sulfur.
![]()
In the actual silicon rubber hose production, often encountered sulfur speed is not ideal situation, I generally is used to adjust the active agent or accelerator, but I recently heard that useful sulfur to adjust, sulfur speed fast less add some sulfur, whereas add more, this excuse me?? Is there a hangover?
Or be cautious, although this is very direct effect is also very obvious, but many things will change. If it can try the formula in the process of development, but the basic experiment to verify. If it is not to do so, the production formula to find the cause of the change, the increase of sulfur sulfur sulfide may be considered to be sprayed, other things are inevitable. So cautious. General use CTP much more quickly, more slowly, a little slower. After all, the promoter and sulfur, etc., have an effect on the physical properties. Specific conditions, can not lump together.
Shenzhen odd and silicone rubber share CTP has a big problem, silicone tube easy to spray cream, so adjust the words, there is a range of it - sulfur should be in the standard dosage of what range? General CTP use 0.5 will not spray, if the CTP in the amount of the content can not meet the sulfur speed, we must consider the fine-tuning formula. Fine tune the formula is not the landlord said the pure sulfur, and the rest of the mix to increase the amount of the reduction, to ensure the consistency of the material before and after the need to determine the test. P.S. I've seen that the monotone sulfur is the density of the cross-linked.
In short, the CTP's range of adjustment. Indeed CTP plus 0.5 is more dangerous, long time parking may be sprayed, but I did see 0.5.
This paper is from Shenzhen,, id=465?
This love or feel this to help you, please share it with your friends ^_^
|
Online Service 