|
Is the time of the silicone tube with the wall thickness?
![]()
What is the relationship between the wall thickness and the curing time of the silicone tube in the same temperature? If the wall thickness of the curing time can not increase the temperature to reduce the time of curing? At the same temperature, of course, wall thick product time to long, raising the temperature is not desirable, wall thick products are generally at a low temperature for a longer time, otherwise easy to outside and cooked inside unfamiliar. The same kind of plastic material, product thickness is not the same as the same as the process of curing process, the thickness of the product is not only a long time to ensure the quality of products. Increasing the temperature can be, however, the impact of the difficulty of reducing the performance of the water inlet is carefully.
Silicone rubber silicone rubber to share with the metal, water, heat conduction is not instantaneous, the temperature from high to low place to have a time process. If you have a high temperature, the biggest possible is that the source of the heat source may have already been cured, and the interior is near the central part of the site that may have just begun to be cured. In general, the thickness of the product per 6mm, at least on the basis of the 2min to increase the T90 above the curing time. Thick products of low temperature and long time or will cause the outside and cooked inside. Can the product be used for two different types of film? In the middle of the film with a fast curing speed, on both sides of the slow one point, to achieve the best physical performance. Of course, this process more.
This paper is from Shenzhen,, id=474?
This love or feel this to help you, please share it with your friends ^_^
|
Online Service 