|
The loss of the normal production of the silicone rubber tube manufacturers
![]()
Some customers in order to make a small amount of silicone tube, we need to charge the boot fee. The boot fee includes mixer and mold. These ones here
What is the process loss in the middle of the process? Is there a standard in this area? The following odd silicone rubber on the decryption of silicone tube manufacturers to produce normal
Loss.
In a normal general mixer's loss is about 0.8%, according to the state did not know the specific requirements of the standard
Mixer, good sealing loss would be less, not good will be more. If the black rubber particles are large,.
Is less, if the carbon black powder consumption is great. We should go to the specific analysis of specific signal,
There are generally about 0.8 of 0,5 to the registry. The material loss is related to the discharge temperature, and rubber varieties and raw materials
; natural rubber high temperature, release of low molecular weight carboxylic, # and moisture; white carbon black will also release some water; total losses would be super
1.5%.
Loss to see the type and formula, generally not more than 0.8%. There are 1% or so, look at the equipment good or bad, good can do 0.8%
, the difference is not the end, of course, will not be cast into the 30Kg, the results come out only 15Kg. did not calculate how much loss, plastic material
Problem OK.
This paper is from Shenzhen,, id=476?
This love or feel this to help you, please share it with your friends ^_^
|
Online Service 