|
How to improve the tensile strength of silicone tube?
![]()
There are some problems in the practical production of silicone rubber hose. For example, in the same hardness under the condition of how to improve the tensile strength, tensile is
Deformation also increased?
The hardness of silicone tube is reduced, but the tensile strength is two points, tensile deformation is still high five degrees. Tensile deformation
Is still on the high five degrees, but the hard acid down after a high standard of five degrees, is not the amount of the drop? Improve the setting
Stress method. I think fine carbon black, rubber grade, increase the change amount of curing agent, can improve the tensile stress.
Shenzhen Qi Yu silicone tube manufacturers to share: if it is a natural rubber, for example, with some of the accelerator is high. How to increase the strength of a certain amount?
Tensile deformation but also need to increase the number of? Adjusting bridge system though helpful, but improve the tensile strength tensile deformation should be reduced accordingly.
If to change the amplitude (tensile strength, tensile deformation) is not too large, can add a little white carbon black or clay to improve the tensile deformation, although
After a little bit of 660 to maintain the hardness. If the tensile strength is not enough, can improve a little bit accelerator or sulfur to improve the bridge.
Degree. Or to replace the 660 white carbon black and clay, and then adjust the amount of oil and 330 processing, can meet the needs of the most.
This paper is from Shenzhen,, id=484?
This love or feel this to help you, please share it with your friends ^_^
|
Online Service 