|
Common problems of silicone rubber products
Recently, a summary of some of the customer in consultation with some of the basic issues of the silicone tube. Small series are concentrated in the Luo
Out of the 9.
1 what is your company's general development cycle for silicone rubber products?
Silicone tube product offer within 1 hours
Silicone tube sample of 1 days to complete, the normal situation of the first batch of 3 days
2 silicone rubber hose products have the production of mold, why do we need to open the sample mold?
Silicone rubber hose products have the production of mold, why do we need to open the sample mold? First of all, sometimes customers come to the silicone tube products
Structure is not very accurate or complete determination of the time, we usually use the sample to develop, it will be very convenient
Modification of the silicon rubber tube product size structure. But sometimes, when the request of client mode but not drawing, then we
Can only sample mold proofing, to product structure size measurement data using samples by measurement of sample data
The data re mapping, and then opening, but data obtained by measurement data usually error may occur, only
In order to reduce the production security useful sample mold mold modification times.
3 what are the advantages of your silicone rubber products in the factory?
Our silicone rubber products are mainly latex tube, silicone tube, silicone rubber, silicone, silicone sealing ring, etc.. Our advantage
We have our own factory, product research personnel and technical personnel, to do this silicone rubber industry has been 10 years.
4 silicone rubber products offer 1 hours can be reported, and some half a day can not be reported?
Why we can give our customers the OEM custom silicone rubber products in 1 hours, but some of the customers are customized.
Product 2 days are not reported. If you have a silicone rubber product that needs to be customized, and it is now in need of a bid, you need to provide a letter.
Interest:: please provide the silicon rubber products 3D file, process diagrams, or send physical samples to our; (2): please explain the custom of this section
Silicone rubber products;
I give you 5 3D drawing will you give us a price?
Hi, you need to provide us with this product related process flow, material requirements and so on, such as the requirements of silicone,
Specifications
6 silica gel products of raw materials classification and use is how?
First introduce the ordinary silica gel material, ordinary silica raw material is a substance is deposited, his color will be showing a translucent or opaque
Color of color, silica gel raw material in fact, the color is transparent, translucent, milky color is due to the ordinary silicone material
There are precipitation impurities, hardness, elasticity, elongation compared to pure silica materials are relatively low, so the ordinary silica gel material factory
For industrial products, the comparison should be used in the production of middle and low grade silicone products.
7 how to color the color of silicone products?
We need to understand the silicone products, color box color is two different concepts, color is we first have the color of a target
, and based on our experience to match color masterbatch, of various color masterbatch in proportion to match and color into closest to the target color
Color of the products, and color that already exists to adjust the color to become the most close to the target color products. Between the 2 color
The operation is to be based on the color to do lag, and the different color is the need to start from scratch to develop formula and wake up with a start to change color
.
8 your company's general product inspection standards is what?
General inspection standards are such, unless the customer special inspection criteria: silicone surface process products rubber wear >500
RCA>3-6 times
The detection range is 20 - 30cm, and the time is 5S
The detection position is to check the surface and the table into 45 degrees, the upper and lower rotation 15 degrees
Plastic surface technology products RCA>200-300 times
Adhesion was >4B (5%)
9 why some silicone products will have a bad smell?
Silica gel is a kind of highly active adsorption material, which belongs to an amorphous material, and its chemical formula is nH2O - mSiO2. Insoluble in water and any
The solvent, non-toxic and tasteless, stable chemical properties, in addition to alkali, hydrofluoric acid does not react with any material.
Silica gel itself is not a smell but the smell may be used to compare the raw material of the raw material, there is a sulfur curing agent
Smell of.
This paper comes from Shenzhen,.
This love or feel this to help you, please share it with your friends ^_^
|
Online Service 