|
Why is it that the formula of silicone tube curing system is more than that of the process?
Why is it that the discussion of a formula is a silicone tube curing system, and the discussion of the silicon tube process less?
If it is to do silicone tube fixed products, technology should be basically fixed, the key or formula. That process by production equipment and products, equipment, fixed, product fixed, process is almost the same. Also, curing system is a formula comparison mysterious place, is the soul of the formula, discuss much. A good formula, the process is not a problem in a large range of fluctuations, which is a mature classic formula!
Silicone tube products of different formula, process have great difference, miscellaneous pieces of key technology formula, the key parts, various kinds of cold, heat, oil bag, vacuum, radiation, magnetic and so on, and achieve the same requirements can be used with different systems, the change of sulfide system more, but also certain properties such as heat resistance, pressure change, such as the Scorch effect of storage, die in the process of curing system influence is very large in the flow of time, curing point determines the production efficiency and so on, with a miscellaneous products, can have a variety of choices in the design of curing system, so that the problem discussed more.
Silicone rubber hose formulation and process are key, mutual adjustment of the product is relatively stable. Products are different, the process is different, the basic formula! So open discussion, the basic formula based. A good recipe design will consider process operation is simple, the curing time is reasonable, production will take into account, only the design of immature formula will doom to adjust the process. Formula and process are very important, but do not agree with the idea of a 1 point formulation of 9 points. Specific formulation of specific process. Is probably the formula is easier to control and regulation, and to regulate cost is relatively low, and process regulation in addition to the technology and experience, but also equipment, mixing equipment, molding equipment, post-processing equipment, and other ancillary equipment) and investment.
This paper is from Shenzhen,, id=561?
This love or feel this to help you, please share it with your friends ^_^
|
Online Service 