|
How to distinguish the fake and inferior products (a)?
Know how to identify silicone products quality can let you dispense with a lot of trouble, the poor quality of silicone products not only let you spend
The wrong money, but also may affect the user's physical health. There are a lot of silicone products, different silica gel products
Quantity is good or bad, in short, we need to grasp the two main methods in the face of the problem of silicone products detection
To identify the quality of silicone products.
First how to identify the authenticity of silicone materials, some manufacturers in order to save the cost of the use of other similar silica gel
Materials, they have similar hardness, feel, elastic. It is difficult to judge true and false by intuition, and these materials are
On the low cost of silicone material, the use of a shorter life, anti-aging and other related properties and silicone material has a big gap. Needle
For this kind of product we can take a fire burn method to distinguish the authentic silicone products after fire burn will not produce a lot of smoke
Fog, will produce a small amount of white smoke, and after the completion of the burning, leaving only a little white powder, the white powder is two oxidation
Silicon. If the other is non - environmental protection material will produce a lot of smoke and sticky material.
Second how to identify whether silicone products are qualified, as silicone products are used in molding, and the product is a very big one
Is the mold design is reasonable at this time I need to check the product winger is cracking and silica gel products once
Cracking, the whole product has been lost, and this phenomenon is caused by the design of the die gap is reasonable, so,
When we check the silicone products, we must not let go of the screening of fatal defects in the product.
|
Online Service 