|
The performance of silicone tube in the production of plastic products will not be affected?
Production of silicone tube when the rubber is an important step, but sometimes because of negligence, let mixing time is too long, it is said
The plastic material has been refined. This will not affect the performance of silicone tube?
Shenzhen Qi Yu silicone tube manufacturers to share: This is very much affected by the performance of silicone tube, see you have a degree of refining, will affect the pull
Tensile strength; final mixing after refining will scorch the masterbatch; mixing seen to what extent, will reduce the strength of discretionary use. In particular
NR et al. The tensile strength will decrease after the strength of the reinforcement! The strength of the product is greatly affected by the material of the plastic material,
Other performance is also difficult to meet the requirements of the. The performance will decrease with the degree you have!
There is a chain of the rubber inside the chain is broken. And then do the silicone tube will be greatly reduced. Too
It is certain that it is affected, especially the physical and mechanical properties. If the degree is high, it is recommended to add a little stearic acid, then it is low.
If too thin by temperature, mixing is serious, it can only be a waste rubber processing, otherwise it would take too much rubber according to 10-20% proportion plus
Into the new plastic! Will fall! The degree of decline is related to your degree of refining! The whole performance of silicone rubber tube is affected by the chain, which has been affected.
The tensile strength decreases and the tensile strength is not required, and it can also affect the hardness of silicone tube.
This paper is from Shenzhen,, id=574?
This love or feel this to help you, please share it with your friends ^_^
The performance of silicone tube in the production of plastic products will not be affected?
|
Online Service 