|
What is the phenomenon of the silica gel tube and how to solve it?
First of all, the phenomenon of the silicone tube is a product of different degrees of the product of a sponge like breach, and the gap is clearly felt more sticky. This
And the aging of latex tube.
Secondly, what is the cause of this lack of sulfur? It may be mixed with sulfur without mixing. Recommended roll distance! Auxiliary
Help the poor dispersion material, not sticky, is certainly uneven mixing. Drag back to pack two times, the storage of one night,
If it is a silicone rubber tube single crack, can be considered to reduce the temperature of 3-5 degrees can be. Can also be appropriate to drop some water, help the exhaust
Flow and mold, less sulfur phenomenon is the rubber sponge inside, you must not lead to the phenomenon of less sulfur. Also possible
Zinc Oxide is not purity, unfamiliar with the phenomenon of internal cause. That is the formula and process maturity should be a material, yuan
No change, the mixing uniformity of manufacturers.
Analysis of silicone tube manufacturers:
1 if mixing is uneven, or the mixing temperature is not reached, causing no additives break up, as long as the glue from the new turn
Play in the thin 4 to 5 times on the can, but also to improve the words on the extension of some of the time. To see if it is not in the corner of the mold
At.
2 if it is because of the presence of gas and caused by rotten bubble. Can set up the air compressor. We do products, generally not
Large may be due to the uneven and cause defects caused by. Adjust the curing system, or reduce the problem, and prolong the curing
Time.
This paper is from Shenzhen,, id=589?
This love or feel this to help you, please share it with your friends ^_^
|
Online Service 