|
Which is the ability of the inner braided silicone tube and the outer braided silicone tube?
Some customers in the inquiry is referred to the relevant issues of the braided silicone tube, there is such a problem: inside the braided silicone tube and the outer braided silicone tube which is a strong pressure? Under the simple instructions.
It is also called the reinforced silicone tube, which can be divided into three kinds: inner braided silicone tube, middle braided silicone tube, outer braided silicone tube. Depending on the use of different materials are also different, the general low pressure is usually fiber woven, high pressure is generally wire braid, the more layers, the more pressure.
The so-called outer braided silicone hose is common for the hydraulic pipe type, that is, wrapped, can enhance the pipe pressure, wear, corrosion, etc., the same layer, the more pressure. But for the hydraulic pipe, it belongs to the inner braided silicone hose, mainly rely on the internal reinforcement layer to resist the pressure, the outside is not much of a role to play. Common pipe wrapped in the market for the majority of domestic, due to the process is relatively backward, still using a layer of fabric. Other common wrapped tubes are also used in the steam area of steam and silicone hose, for the safety of.
So the burst pressure and internal and external relations, to see the product description of the manufacturers. Normally, the domestic pipeline burst pressure is about 2 times the work pressure, of course, does not rule out the part can reach 3-4 times. Foreign countries should be about 4 times. If it is applied in the field of high pressure, it must pay attention to.
This paper is from Shenzhen,, id=609?
This love or feel this to help you, please share it with your friends ^_^
|
Online Service 