What are the classification of silicon...
|
Silicone tube can be divided into the "extrusion pipe", "shaped tube". According to categories, can be divided into medical silicone tube , l...【Read All】 |
Just the production of silicone tube w...
|
The surface of the silicone tube produced just the white spots is what causes? Small series mainly summarized as the following 4 points: 1, w...【Read All】 |
What do you need to pay attention to i...
|
The biggest difference between winter and summer is temperature, but in the production of silicone tube is a very important process when mix...【Read All】 |
Silicone tube: silica gel hardness can...
|
In the production of silicone rubber hose may be due to a small mistake to make its high hardness, how to do? How can ability reduce its rig...【Read All】 |
Qingdao rubber industry technology res...
|
Qingdao Rubber Industry Technology Research Institute, Qingdao Institute of Opto electronics industry and Qingdao City, the Technology Resea...【Read All】 |
Whether related to the hardness of sil...
|
Silicone tube according to different needs of the required hardness is also different. Such as food grade silicone tube and medical silicone...【Read All】 |
Analysis of hardness testing of medica...
|
Medical silicone tube in the hardness of the test, directly on the raw material cut two small pieces down, and then together with the sulfid...【Read All】 |
The performance of silicone tube in th...
|
Production of silicone tube when the rubber is an important step, but sometimes because of negligence, let mixing time is too long, it is sa...【Read All】 |
Analysis of the anti tear of silicone ...
|
Existing silicon hose products hardness 40, gum rate close to 90%, foreign products, silicon rubber hose with scissors cut a small mouth tor...【Read All】 |
How to reduce the surface viscosity of...
|
Silicone tube with peroxide vulcanization, but after the two section of the tube after long time storage or stick together, to see other pub...【Read All】 |